\documentclass[final,5p,times,twocolumn]{elsarticle}

%% if you use PostScript figures in your article
%% use the graphics package for simple commands
%% \usepackage{graphics}
%% or use the graphicx package for more complicated commands
\usepackage{graphicx}
%% or use the epsfig package if you prefer to use the old commands
%% \usepackage{epsfig}

%% The amssymb package provides various useful mathematical symbols
\usepackage{amssymb}
%% The amsthm package provides extended theorem environments
%% \usepackage{amsthm}

%% The lineno packages adds line numbers. Start line numbering with
%% \begin{linenumbers}, end it with \end{linenumbers}. Or switch it on
%% for the whole article with \linenumbers.
%% \usepackage{lineno}

\journal{Nuclear Instruments and Methods A}

\begin{document}

\begin{frontmatter}

%% Title, authors and addresses

%% use the tnoteref command within \title for footnotes;
%% use the tnotetext command for theassociated footnote;
%% use the fnref command within \author or \address for footnotes;
%% use the fntext command for theassociated footnote;
%% use the corref command within \author for corresponding author footnotes;
%% use the cortext command for theassociated footnote;
%% use the ead command for the email address,
%% and the form \ead[url] for the home page:
%% \title{Title\tnoteref{label1}}
%% \tnotetext[label1]{}
%% \author{Name\corref{cor1}\fnref{label2}}
%% \ead{email address}
%% \ead[url]{home page}
%% \fntext[label2]{}
%% \cortext[cor1]{}
%% \address{Address\fnref{label3}}
%% \fntext[label3]{}

\title{The Twelfth Vienna Conference on Instrumentation: Paper
Template}

% if there is only one institution, use this form:
%\author{John Author, Giovanna Autore}
%\address{University of Wisdom, Physics City, Scienceland}

% else, use optional labels to link authors explicitly to addresses,
% as shown below:
\author[A]{John Author}
\author[A]{Johann Autor} 
\author[B]{Giovanna Autore}
\author[B]{Ivan Avtorov}
\address[A]{University of Wisdom, Physics City, Scienceland}
\address[B]{University of Detectors, Particle Town, Experimentland}

\begin{abstract}

This is the template file for papers to be submitted to the $XII^{th}$ {\it Vienna Conference on Instrumentation}. 
Please insert here a short abstract of no more than 10 lines, which may 
but need not be identical in its wording to the abstract you originally
submitted to the Conference. 

\end{abstract}

\begin{keyword}
Instructions for authors
\sep
Latex template file

%% PACS codes here, in the form: \PACS code \sep code

%% MSC codes here, in the form: \MSC code \sep code
%% or \MSC[2008] code \sep code (2000 is the default)

\end{keyword}

\end{frontmatter}

%% \linenumbers

%% main text
\section{Introduction}

Papers for the $XII^{th}$ {\it Vienna Conference on 
Instrumentation} should be submitted as {\it Latex}
files. Please, do not worry if you have never used {\it Latex} before. 
Just download from our Website the file \texttt{VCI-paper-template.tex} 
and the file \texttt{elsarticle.cls}. You only have to edit the 
\texttt{VCI-paper-template.tex} file and insert your own {\it title, 
author names, affiliations (institutions)} and {\it text} instead 
of the sample text given here. Do not modify \texttt{elsarticle.cls}.

Please bear in mind that the formatting style has changed somewhat 
since the last {\it Vienna Conference on Instrumentation}. So, please do
not use old style files you might have kept! 

As {\it Latex}  uses normal text files, you may edit your paper with any 
text editor you like - even with {\it Microsoft Word} (you might, e.g., want
to use the {\it Word} spell checker). In that case, just 
be sure to save the text as text file (\texttt{.txt}), not as ``{\it Word}'' file 
(\texttt{.doc} or \texttt{.docx}), 
and then rename the extension to ``\texttt{.tex}'' before compiling it with 
{\it Latex}.

If you want to see what your manuscript looks like, type the command 
\texttt{latex VCI-paper-template} in the directory containing this 
file and the \texttt{elsarticle.cls} file, and you will get a file 
\texttt{VCI-paper-template.dvi} which on UNIX or Linux can be viewed 
by the command \texttt{xdvi VCI-paper-template.dvi} . 
With the command \texttt{dvips VCI-paper-template} you can produce a 
postscript file \texttt{VCI-paper-template.ps} which you can print out. 
Please be sure to also submit the modified 
\texttt{VCI-paper-template.tex} file (please change the filename to your surname)
as edited by you.


\section{For newcomers to Latex}

As you see in this example, plain text can be entered just as in any 
word processor. Formulae are put inside ``dollar'' signs (\$), Greek 
letters are produced by using a backslash (\verb+\+) followed by the 
name of the Greek letter, and subscripts and superscripts are 
produced by the underscore (\verb+_+) and caret (\verb+^+) characters, 
respectively. Here is an example: $K_{long} \rightarrow \pi^0 e^+ e^-$. 
{\bf Boldface type} and {\it italic type} is produced as shown here. 
Comments follow a $\%$~(percent) sign % this is a comment
% this is another comment
until the end of the current line.
If you need anything more sophisticated, please consult a {\it Latex}
manual, ask your local {\it Latex} guru, or contact us at {\texttt{proceedings@vci2010.at} .

\section{Formatting}

As we are using the publisher's ``style file" and control commands (all the commands in
this {\it Latex} file preceded by a backslash ``\verb+\+'') you automatically get more or less the formatting
your paper will have in the printed journal. However, the publisher will re-process the file
and might adjust the layout and the size of figures and tables.

\subsection{Lenght of paper}

The length of the paper is 4 pages for all contributed papers (talks and posters
that have been accepted for publication in NIM A), and 10 pages for invited talks 
(figures included). 

\subsection{Figures}

The following example shows you how to include figures. {\it Latex} will put your figure where it considers it suitable. The publisher may subsequently still change the layout, so don't worry too much about how to position your figure. If you want to refer to a figure in the text, you should do this using its label (see Fig.~\ref{fig:VCIposter}).

\begin{figure}[hbt] 
\centering 
\includegraphics[width=0.5\textwidth,keepaspectratio]{VCIposter.pdf}
\caption{The poster of VCI 2010.}
\label{fig:VCIposter}
\end{figure}

\section{Citing references}

In the text, cite publications as \cite{MyQuote1}, \cite{MyQuote2} and so on. 
The references have to be collected in the bibliography section which you find at the
end of this template. 

\section{More information}

For more information or if you need more special features of {\it Latex}, please go to the publisher's web page at 
{\small http://www.elsevier.com/wps/find/authorsview.authors/elsarticle}.
The template file given here has been adapted from the file 
\texttt{elsarticle-template-num.tex} you can download from that page.

\section{Support}

If you encounter any problems, please do not hesitate to contact us by email
({\texttt{proceedings@vci2010.at}) or during the Conference at the Paper Submission desk.


%\section{}
%\label{}

%% The Appendices part is started with the command \appendix;
%% appendix sections are then done as normal sections
%% \appendix

%% \section{}
%% \label{}

\begin{thebibliography}{00}

\bibitem{MyQuote1} Giovanna Autore, Ivan Avtorov, Proc. of the 100th Vienna Conference
on Instrumentation, Nucl. Instr. and Meth. A 4000 (2274) 111.

\bibitem{MyQuote2} John Author, Johann Autor, paper presented at this Conference.

\end{thebibliography}
\end{document}
\endinput